How do I remove the camo design from this knife , I like overall shape and feel just hate the camo on it . I have tried using a sharpening stone to just go over it on both sides to remove as much as I can but I does hardly anything .
by Wrex12885
EDCTIPS.COM
- True EDC
- You gotta do what you gotta do
- NKD! Shirogorov Gen 5 F95NL
- Workflow EDC
- NKD but possible QC issue?
- F style Hunter with ADS damascus blade and matching bolsters. Mammoth ivory for scales. Ti screws and a cool pivot pin. The sheath is tooled leather with a very soft pig skin lining. OAL is 9 inches and the blade is 4 1/8
- Had To Share
- Rovyvon A3 Emitter swap
![[NMD] - I sanded the inner sleeve down on my FW1AA to close the gap](https://www.edctips.com/wp-content/uploads/2023/04/7sx4cgt2wgua1-150x150.jpg)
1 Comment
The easiest way to get it uniform and clean would probably be a sandblaster. If you don’t have a friend with one, you should be able to get a cheap one from your hardware store if choice. Keep in mind if you do it yourself, you’ll have to either buy or make a hood for it, or it will blast anything behind the knife as well. I’ve used old cardboard boxes before to some success, but you’ll lose a lot of the beads that way.