Second O-ring TS10 placement?
by WilXStunting
EDCTIPS.COM
- True EDC
- You gotta do what you gotta do
- NKD! Shirogorov Gen 5 F95NL
- Workflow EDC
- NKD but possible QC issue?
- F style Hunter with ADS damascus blade and matching bolsters. Mammoth ivory for scales. Ti screws and a cool pivot pin. The sheath is tooled leather with a very soft pig skin lining. OAL is 9 inches and the blade is 4 1/8
- Had To Share
- Rovyvon A3 Emitter swap
![50 Days Of Beating My Big Banter [u/johnjensen_]](https://www.edctips.com/wp-content/uploads/2023/07/q3tw3i6amgab1-150x150.jpg)
5 Comments
I just took off the head of the TS10, but one lf the orings fell if, and when I try to but it back and tighten the bezel, it falls/shoots off. Where do I place it?
Kinda hard to tell from the description and pic but perhaps that is the o-ring that goes on the head portion of the battery tube? Or if it’s the one under the bezel, between the glass and it got stretched.
This is part of why the bezel is glued to the head. That O-ring is a bitch to keep in the groove when you go to put the bezel back on.
You have about one-third of it exactly where it needs to be.
EDIT – Wait, head, or bezel? If the head, then there’s only one O-ring that you’ll ever see. There are three total though. The head and bezel both have one at the base of the threads, and there is a third in the groove of the bezel that presses against the optic.
The two on the threads are small and on there tight. The only one that can really fall off/out is the one against the optic.
Well, I accidentally bent the TIR legs, seems like I have to get a new ts10.
I feel your pain…My fireflies flashlights eat o-rings. Have these upvotes.