Enjoy your new 70 they buy you. That edge looks burnt and uneven af. It also looks like they removed a fair amount of metal. Time to speak to the manager, Karen.
Serious-Concern-192
I’m sorry for your loss
Jesse060408
Wow, that’s horrible.
Captn_Trouserz
The thing that really gets me is, I’ve taken knives there in the past and have been very happy with the results. Idk what happened this time.
edtb
You got fucked. Was it a licensed business or just someone who sharpens on the side. Either way I’d be back there pissed demanding a replacement.
knife_go_live
This is the most important reason why any knife enthusiasts needs to learn sharpening..if for no other reason.
justScapin
RIP in peace
Es_daily
Ouch!
Pendexter
Honestly that’s what I’d expect out of a sharpening place. I know many are better than that, but as soon as I saw the picture I knew exactly what the post was going to be.
If for some reason I needed to take it somewhere, I’d talk to the guy and ask what equipment they use, what angle they sharpen at (or if they match existing) and what grits they use. If I didn’t like the answer to any of those questions I’d hop over to harbor freight or Wal-Mart and get a $5 stone.
frankybling
ouch… a pull through (fuck I said it) might have worked better
Redbullbundy
I just take them to microtech to sharpen for me.
jonpaul2277
I’ve had the same experience when I brought several of my favorite knives to a place that I thought would do a good job. I was so angry when I got my knives. I will always trust myself to get the job done. It was not hard to gain confidence in my ability to sharpen a knife. Now I think of those clowns every time I sharpen a blade and think how much money I saved as well as how much better my edges are.
a_w_jones
Ouch …
Sieze5
Holy smokes! Hack job.
sonnythedog
Yup. Same thing happened to my brother he tool his Benchmade to one of mall ninja sharpening places at the mall. The dude just put the blade on a grinder and even took off the serrated half of the blade. Sucks.
CaptainFCO
Did they fall asleep while machine grinding the back of the blade. Jeez! How can they give it back like this?!
Nekommando
showside was kinda OK but the otherside ….
UTX70 is probably too small to be held consistently and comfortably. prolly gonna need to tape off the rest of the blade and sharpen at very shallow angle on coarse soak stones to fix this
evrtt2009
Worksharp precision adjust elite.
Basehound
Buy a Ken onion worksharp elite …. And never look back .
diablito916
you got the “anything else” treatment
H1L1fe
I think you forgot to post the ‘after’ pics!
GRIND2LEVEL
Wow they let the new guy transition from lawn mower blade to yours as the next step in honing his skills 😭
sinisterdeer3
He owes you a new UTX 70
XTingleInTheDingleX
A shame
KuroKen70
Oh God. I have nightmares about this sort of thing
thellymon
Ouch, looks awful
RoomFinancial
Bummer, is it sharp at least?
Paws81
Oops.
RoomFinancial
I use an overpriced wicked edge, works great but I regret spending as much as I did on it, there’s systems just as good for less than half the price.
wayofthefeast
Pain.
Pigsfly77
Got the kitchen knife special
killerbern666
i puked 🤢
trace_decay03
Damn, haven’t sharpened any of my knives yet (still new to knife collecting) but I will definitely do it myself haha. RIP your blade
Techyness
Ask him to replace it with one of his cool ass knives if he has any. Too bad this won’t even slash his tires
immoralfoul
Yeah a lot of retail sharpening places most actually don’t really deal with high quality steel. They just sharpen tools and maybe some knives but not high quality ones like that.
Frankito55
Oh that’s nasty
Ohio-Knife-Lover
Rule number 1 about local places: Ask for examples of their work. Rule number 2: ask them how they’re sharpening their knives. Rule number 3: take before and after pictures
JakeSaco
I don’t get it. Anyone who has ever browsed this sub knows not to take their knife to anyone else for sharpening. Either learn to do it yourself or send it back to the original manufacturer/maker for sharpening *(even if it costs a bit more money*), but no one else should touch it. This is doubly true for any knife that costs 3 figures or more.
RickHuf
Did they use a bench grinder?? Holy cow. I’m sorry dude, that’s a rough one.
midline_trap
BOTCH JOB
Dull_Ad_704
That’s why microtech forbidden sharpening knives to customers back in the days
rick-p
I really hate this. If I ever did this my customers would kill me. People who do work like this give professional sharpeners a bad name and I hate it.
VisualBusiness4902
Let me know how much a ultratech blade replacement ends up being haha. They do offer it. I have a tanto blade I dicked up I’d like replaced lol. It happens to everyone now and then huh.
Vlstr-N
Looks like I did it
LOL
Erdnuss-117
Giving your knife to someone to sharpen them is like giving your gf/wife to someone else for a good railing. You should be good at doing that yourself.
45 Comments
Enjoy your new 70 they buy you. That edge looks burnt and uneven af. It also looks like they removed a fair amount of metal. Time to speak to the manager, Karen.
I’m sorry for your loss
Wow, that’s horrible.
The thing that really gets me is, I’ve taken knives there in the past and have been very happy with the results. Idk what happened this time.
You got fucked. Was it a licensed business or just someone who sharpens on the side. Either way I’d be back there pissed demanding a replacement.
This is the most important reason why any knife enthusiasts needs to learn sharpening..if for no other reason.
RIP in peace
Ouch!
Honestly that’s what I’d expect out of a sharpening place. I know many are better than that, but as soon as I saw the picture I knew exactly what the post was going to be.
If for some reason I needed to take it somewhere, I’d talk to the guy and ask what equipment they use, what angle they sharpen at (or if they match existing) and what grits they use. If I didn’t like the answer to any of those questions I’d hop over to harbor freight or Wal-Mart and get a $5 stone.
ouch… a pull through (fuck I said it) might have worked better
I just take them to microtech to sharpen for me.
I’ve had the same experience when I brought several of my favorite knives to a place that I thought would do a good job. I was so angry when I got my knives. I will always trust myself to get the job done. It was not hard to gain confidence in my ability to sharpen a knife. Now I think of those clowns every time I sharpen a blade and think how much money I saved as well as how much better my edges are.
Ouch …
Holy smokes! Hack job.
Yup. Same thing happened to my brother he tool his Benchmade to one of mall ninja sharpening places at the mall. The dude just put the blade on a grinder and even took off the serrated half of the blade. Sucks.
Did they fall asleep while machine grinding the back of the blade. Jeez! How can they give it back like this?!
showside was kinda OK but the otherside ….
UTX70 is probably too small to be held consistently and comfortably. prolly gonna need to tape off the rest of the blade and sharpen at very shallow angle on coarse soak stones to fix this
Worksharp precision adjust elite.
Buy a Ken onion worksharp elite …. And never look back .
you got the “anything else” treatment
I think you forgot to post the ‘after’ pics!
Wow they let the new guy transition from lawn mower blade to yours as the next step in honing his skills 😭
He owes you a new UTX 70
A shame
Oh God. I have nightmares about this sort of thing
Ouch, looks awful
Bummer, is it sharp at least?
Oops.
I use an overpriced wicked edge, works great but I regret spending as much as I did on it, there’s systems just as good for less than half the price.
Pain.
Got the kitchen knife special
i puked 🤢
Damn, haven’t sharpened any of my knives yet (still new to knife collecting) but I will definitely do it myself haha. RIP your blade
Ask him to replace it with one of his cool ass knives if he has any. Too bad this won’t even slash his tires
Yeah a lot of retail sharpening places most actually don’t really deal with high quality steel.
They just sharpen tools and maybe some knives but not high quality ones like that.
Oh that’s nasty
Rule number 1 about local places: Ask for examples of their work. Rule number 2: ask them how they’re sharpening their knives. Rule number 3: take before and after pictures
I don’t get it. Anyone who has ever browsed this sub knows not to take their knife to anyone else for sharpening. Either learn to do it yourself or send it back to the original manufacturer/maker for sharpening *(even if it costs a bit more money*), but no one else should touch it. This is doubly true for any knife that costs 3 figures or more.
Did they use a bench grinder?? Holy cow. I’m sorry dude, that’s a rough one.
BOTCH JOB
That’s why microtech forbidden sharpening knives to customers back in the days
I really hate this. If I ever did this my customers would kill me. People who do work like this give professional sharpeners a bad name and I hate it.
Let me know how much a ultratech blade replacement ends up being haha. They do offer it. I have a tanto blade I dicked up I’d like replaced lol. It happens to everyone now and then huh.
Looks like I did it
LOL
Giving your knife to someone to sharpen them is like giving your gf/wife to someone else for a good railing. You should be good at doing that yourself.