Anyone have any experience using this bad boy? I just got it and was wondering if anyone knew any tips or tricks regarding the use of the product. I’m excited to have some dangerously sharp blades 😎
by TerpDurper
EDCTIPS.COM
- True EDC
- You gotta do what you gotta do
- NKD! Shirogorov Gen 5 F95NL
- Workflow EDC
- NKD but possible QC issue?
- F style Hunter with ADS damascus blade and matching bolsters. Mammoth ivory for scales. Ti screws and a cool pivot pin. The sheath is tooled leather with a very soft pig skin lining. OAL is 9 inches and the blade is 4 1/8
- Had To Share
- Rovyvon A3 Emitter swap
![[NLD] First Hank light! D1, 519a 5700k dedome, OP reflector](https://www.edctips.com/wp-content/uploads/2023/04/vp5heSH3aIlN2DC5KZBLxEzdDiwPht_gGxU8gmJKgnU-150x150.jpg)
5 Comments
Keep the pressure light. YouTube for some more tips.
One of the most popular knife sharpeners around. Consistent results but not a fan of the dry type stone
I love mine. I was able to get my PM2 hair splitting sharp using just what comes in the base set.
After you have put some hours on it, look into [aftermarket lapping films](https://www.ebay.com/itm/154409695821?hash=item23f388fa4d:g:QVEAAOSwjV1h7YKW&amdata=enc%3AAQAIAAAA0OnZ38IueQjcgMMHQIKgV%2BpvdMvhTi7dE4xc8fUv2XPhp3oTki0ZZKzn4966mdQBdXTLcC1mELSxALtLJLqtPceM7Msg5oqDxwJ7mlLBuPL3ODJUsKbB4gMhpvwWC612o%2Fy08Fm4Rldrrzx6G0DUXt1Jxqi0VrnDsyigD%2BQRUHP4hAwd0Hz2Mug2MsoQ%2BJVPQIqW5pn1r9%2BnpOoOHo9U0Ccr7zP0lnJdXIfK7F4hReNdYvPw8TnLg2PyGWDJMaW7KHrtzsmHW5dxupGBzLTOFTs%3D%7Ctkp%3ABk9SR-yjz6_3YQ).
Hop on Etsy and grab a support for the arm. It takes the play out of it and helps you get a sharper edge. Great upgrade for $6-$15 depending on the one you pick
I second the support arm. The only other thing I can add is to get your blade as centered as possible in the clamp. It will make for a more consistent edge along the length of the blade.